Home > Tutorials > Art File Creation Tutorial in Paint Shop Pro

Art File Creation Tutorial in Paint Shop Pro

In this tutorial you will learn how to create the art files shown in driver.

Note. To complete this tutorial you will need to have available a suitable route for the creation of the screenshots.

You can download the sample Icon map with textures here and the track* here.

The Paint Shop Pro templates are available here.

*The track was created by CloakedGhost275 by my request it is a modified

version of his Rail Ties and is used with his permission.

1. Screenshots

The first item we need is the screenshots. If you downloaded the above maps then for the icon image select and place your rolling stock item in surveyor on the track mark. To get the item in the correct location you need to have the front of the item in line with the trackmark. Once you have the item in the correct location switch to driver either using the shortcut icon, Ctrl-F2 shortcut or exiting surveyor and loading driver selecting the Consist Icon images map and run it. For all three methods you will need to create and save a session. Switch to the tracking cameras take a screenshot with the "Print Screen" key.

2. Paint Shop Editing

Once you have the screenshots you will need to edit them in Paint Shop The screenshots are located in "C:\Program Files\Auran\Trainz\ScreenShots" with the "C:\Program Files\" being the location you installed Trainz to. Also open the Paint Shop templates or create a new file with a dimension of 128 x 64. Once you have it opened or created we can begin editing the screenshot. Select the icon screenshot and then select the "Magic Wand" tool and change the "Tolerance" and "Feather" to 0 and click on the black area on one side of the track in the screenshot. Hold down the shift key and click on the other side of the track. If all of the black area is not selected then continue holding down the shift key and selecting more black area. Once you have finished then we need to invert the selection so that only the locomotive is selected. There are two ways to do this, the easiest way is to press Control-Shift-I and the other way is to go to the "Selectoins" menu and select "Invert" either way the selection is inverted and ready to be copied to the template. Press Control-C or select "Edit", "Copy" and then paste the selection onto the icon template by pressing Control-L or selecting "Edit", "Paste", "Paste as new layer" from the menu.

Figure 1 Magic wand tool

Figure 2 Magic wand tool settings

Figure 3 Loco correctly selected

3. Resizing and relocating

The first thing you will notice after pasting is that the image is too large, to change the size of the image select "Resize" from the "Image" menu. In the Width and Height boxes select and type a setting from the table below.

	Icon
Resolution	Width and Height
1600 x 1200	40
1024 x 768	65
800 x 600	80
640 x 480

NOTE: These dimensions are a guide only.

After you have resized the image you then need to relocate it to an appropriate location. If you are using my Paint Shop Pro templates then for the icon place the lowest pixels on the line. Once you have completed this select "Merge", "Merge all (Flatten)" from the layers menu to merge the layer with the back ground.

Figure 4 Transform type in boxes

4. Alpha channel

After you are satisfied with the image size and location select the "Magic Wand" tool again and select the black areas again. Press Control-Shift-I to invert the selection. Select "Save to Alpha Channel..." from the "Selections" menu. In the message box that appears make sure the preview window shows the locomotive and track white and the surrounding area black. Select the New Channel and click OK. Rename the New Channel to Alpha 1. You have now created and saved an alpha channel which should look like figure 9 a white image of the locomotive and tracks with a black surrounding area. To see the original RGB image select the Channels drop down box and click on the "RGB" entry

Figure 5 Save to alpha menu selection

Figure 6 Save to alpha dialog box

Figure 7 Channel name message box

Figure 8 Alpha channel

5. Save location

The correct location to save the files to is called the tutorial_images sub-folder with tutorial the name of your rolling stock item. Save the icon image as tutorial_art_icon.tga. When saving the file ensure that the checkbox "Alpha Channels" is checked. If it is greyed out then you have not correctly created the alpha channel or the update to the TGA plug-in was not applied. Then in CCP you need to add the thumbnails container and reference the icon as one of the textures.

Figure 8 CCP showing thumbnails container and icon reference

6. Text files

Now that you have saved the files to the correct location you will now need to create the text files that allow Trainz to find the image and its alpha channel. Create a text files called tutorial_art_icon.texture.txt. Open the text files and enter the following information

Icon

Primary=tutorial_art_icon.tga
Tile=st
Hint=Dynamic
Alpha=turorial_art_icon.tga

Once again replace the word tutorial with the name of you mesh and folder structure.

Was this tutorial helpful? Not enough or too much detail? Points not explained properly? Suggest any improvements? Please use the Tutorial Enquiry Form

Trainz and Trainz Railroad Simulator are trademarks of Auran

Best viewed at 1024 x 768 or higher

Pages best viewed with Cooper and Cooper Black font installed.